They say that when creating something, your imagination is the limit. As long as it is doable, then you can do as you please. At present doing something by yourself has even been easier with the available guides online. Also, the opportunity of creating something original is wide.
Among the most common thing teens have fun creating are bike accessories. Things such as cup holders for bikes are becoming popular because of its practicality as well. With it as an accessory, you can easily have access to your tumbler or any drinks you wish to put on it. So today, we will go over the step by step guide that you can follow to make one that will have your ideal design.
Start by getting all the things you will use in designing the accessory.This could include a bike mount, an empty can with the size of your choice but preferably something that can fit a regular size tumbler, paint brush, sealer, koozie and other art materials you plan to attach on the holder later on. Also prepare a paint of your prepared color.
The first thing you need to do is to clean the can. This means removing the label, sharp edges and the smell that it may have. Wash it with water and detergent if you need to. Just be careful not to cut yourself with its edges. Also, ensure that the end product will be free of any sharp lines to prevent future injuries.
Next step will involve the bike mount, its screws, marker and the drill. Find an area of the can where you wish the mount to be attached. A word of advice, place it somewhere but the seam of the can. This is usually the weakes spot. Mark the selected area with a marker and drill a hole in it right after. Attach the mount.
At this point, you should be able to have a visible cup holder. The next stage would be to create a personalized design. Get the koozie and slide it inside the can. This will provide additional insulation for the accessory.
Next, gather all your materials like thick colored papers, cloth and paint. You may choose to cover the can with any of these materials. For instance, you can paint the whole can red and then cut small circular shapes of thick colored papers. Attach these to the cans to achieve a polka dot like appearance.
You have the full control on what you want and what not to include on the design. The most important thing that you have to remember is to always strike a balance with your chosen style. Remember that the cup holder is an accessory to your bike. Meaning it should match well with your unit. It is a part of a whole. Make it look like it belong.
Now that graphic design is widely used, adding a touch of legitimacy and class to your holder is already within reach. By asking the aid of affordable printing services, you will already have a customized design printed to match your bike.
Among the most common thing teens have fun creating are bike accessories. Things such as cup holders for bikes are becoming popular because of its practicality as well. With it as an accessory, you can easily have access to your tumbler or any drinks you wish to put on it. So today, we will go over the step by step guide that you can follow to make one that will have your ideal design.
Start by getting all the things you will use in designing the accessory.This could include a bike mount, an empty can with the size of your choice but preferably something that can fit a regular size tumbler, paint brush, sealer, koozie and other art materials you plan to attach on the holder later on. Also prepare a paint of your prepared color.
The first thing you need to do is to clean the can. This means removing the label, sharp edges and the smell that it may have. Wash it with water and detergent if you need to. Just be careful not to cut yourself with its edges. Also, ensure that the end product will be free of any sharp lines to prevent future injuries.
Next step will involve the bike mount, its screws, marker and the drill. Find an area of the can where you wish the mount to be attached. A word of advice, place it somewhere but the seam of the can. This is usually the weakes spot. Mark the selected area with a marker and drill a hole in it right after. Attach the mount.
At this point, you should be able to have a visible cup holder. The next stage would be to create a personalized design. Get the koozie and slide it inside the can. This will provide additional insulation for the accessory.
Next, gather all your materials like thick colored papers, cloth and paint. You may choose to cover the can with any of these materials. For instance, you can paint the whole can red and then cut small circular shapes of thick colored papers. Attach these to the cans to achieve a polka dot like appearance.
You have the full control on what you want and what not to include on the design. The most important thing that you have to remember is to always strike a balance with your chosen style. Remember that the cup holder is an accessory to your bike. Meaning it should match well with your unit. It is a part of a whole. Make it look like it belong.
Now that graphic design is widely used, adding a touch of legitimacy and class to your holder is already within reach. By asking the aid of affordable printing services, you will already have a customized design printed to match your bike.
No comments:
Post a Comment